APC UPS inverter power battery monitoring and management

Utilizing advanced battery management system: APC UPS adopts spontaneous charging technology EBS intelligent battery management system to optimize the charging voltage and current of the battery during the charging process, and comprehensively handle the maintenance and management of the battery, thus improving the service life of the battery. Provide a new charging method that combines float charging technology with pulse charging technology, activate the battery system at any time, and automatically switch charging methods based on the ambient temperature of the battery (float charging technology is used below 22-25-C, pulse charging technology is used above), while braking and adjusting the charging voltage and current. According to actual measurements by European battery manufacturers, the use of a new charger can increase the battery’s lifespan by about 50%. Utilizing advanced battery health diagnostic system (BHC) to monitor and maintain the battery status, ensuring good discharge characteristics. Meanwhile, adjust maintenance parameters based on the ambient temperature of the battery usage. The advanced battery diagnostic recording function can effectively record the results of each battery test and retain them in the form of files. The records are recorded separately by voltage and current, and can be directly displayed on a graphical display. When a decrease in battery performance is detected, the battery repair function of the BHC system will be automatically activated to perform automatic repair processing on the battery, restoring its performance. It can automatically repair the charging voltage and current based on the battery indicators used by the UPS. The overall charging capacity can also be optimized according to the load situation of the APC UPS. When the inverter load of the APC UPS is relatively light, the charging power can be automatically increased; When the load of APC UPS is relatively large, it automatically reduces the charging power to the standard charging power. The monitoring of batteries can be done individually or in groups.