How to monitor APC UPS

There are several ways to monitor APC UPS:

1. Monitoring method of APCsmartUPS

(1) Network monitoring: Monitor through SNMP protocol of network management cards (AP9631CH and AP9619).

(2)Serial port monitoring provided by APC itself: To use the serial port protocol provided by APC for monitoring, how can I apply for the serial port protocol? Specific method: If the customer uses the following models of UPS, APC can provide RS232 protocol for the electrical port. The UPS models are Smarnt, Svmmetra1oh, smartV, sicon, and SuBs. When applying for an agreement, the customer first needs to fill out the confidentiality agreement. After completing and sealing the information in the confidentiality agreement, the scanned copy of the confidentiality agreement should be sent to our email or the original confidentiality agreement should be mailed back to APC. After receiving your reply, we will send the agreement to your email.

(3) Modbus and Jbus monitoring: AP9622 monitoring card needs to be configured to monitor through the following protocol.

2. Monitoring method of APCSYUPS

(1) Network monitoring: Monitor through SNMP protocol of network management cards (AP9631ch and AP9619). Please download the MIB library we provide.

(2) Modbus and Jbus monitoring: AP9622 monitoring card needs to be configured to monitor through the following protocol.

3. Monitoring method of APC SY250/500K

Network and Modbus Monitoring: Monitor through the SNMP protocol of the network management card (AP9635). Please download the MIB library and Modbus communication protocol we provide.